What makes an instrument brass
Brass instruments make sound when the player buzzes their lips into a cup-shaped mouthpiece. That buzz sets a column of air inside a metal tube vibrating. The tube shapes and amplifies the sound, and the flared bell at the end sends it out.
Most brass instruments are made of brass, an alloy mostly of copper and zinc. The material is not what defines the family, though. Some instruments are silver-plated or made of nickel silver, and a few traditional examples are made of wood or natural horn. For the difference between brass and woodwind instruments, see brass vs woodwind.
Pitch changes in one of three main ways:
- Valves (piston or rotary) open extra tubing when pressed, which lowers the pitch.
- A slide, as on the trombone, changes the length of tubing as it moves.
- The lips change the pitch within the instrument’s harmonic series. Instruments without valves or slides, such as the bugle, rely on this.
The brass instrument list
The brass family is usually grouped by instrument type. Names, sizes and tunings vary by country and maker, so treat these groupings as a guide.
Trumpet family
- Trumpet (B♭): The most common trumpet, with three valves. In most bands and orchestras it is the highest-pitched standard brass instrument.
- Cornet: Uses the same fingering as the trumpet, with a shorter and more conical bore. It is common in brass bands.
- Flugelhorn: Wider and more conical than the cornet, with a darker, rounder sound. It is often heard in jazz and brass bands.
- Piccolo trumpet: A smaller trumpet pitched an octave above the B♭ trumpet, used for high parts in baroque and orchestral music.
- Bugle: A valveless, conical instrument, traditionally used for signals. Its differences from the trumpet are covered in bugle vs trumpet.
For a closer look at how these relatives compare, see brass instruments similar to the trumpet.
Trombone family
- Tenor trombone: The standard trombone. It uses a slide, and most are pitched in B♭. Some add an F attachment, operated by a trigger, to reach lower notes.
- Bass trombone: Larger bore and bell, with a lower range. Many have extra valves.
- Alto trombone: Smaller and higher than the tenor. It is less common.
- Valve trombone: Uses piston valves instead of a slide. It is much less common than the slide type.
Horn family
- French horn: A coiled, conical instrument with rotary valves. The player places the right hand inside the bell. It is often simply called “the horn”.
- Mellophone: Related to the French horn, with a bell that faces forward. It is common in marching bands.
- Alto (or tenor) horn: A band instrument in E♭ with a conical bore. The name varies by country.
- Euphonium: A conical, tenor-voiced instrument with usually three or four valves. It is common in concert bands and brass bands.
- Baritone horn: Similar to the euphonium, with a thinner bore and a brighter sound. It is common in school and marching bands.
Tuba family
- Tuba (B♭ or C): The largest standard brass instrument in common use. It is the lowest-pitched in most bands and orchestras.
- Sousaphone: A marching tuba that wraps around the player’s body so it can be carried while marching.
- Contrabass and subcontrabass tubas: Even lower and much rarer. See lowest-pitched brass instruments for more.
Historical and rare brass
- Sackbut: The early trombone, used from the 15th century.
- Ophicleide: A keyed brass instrument from the early 1800s. It was largely replaced by the tuba.
- Cimbasso: A low brass instrument used in 19th-century Italian opera.
- Wagner tuba: A horn-shaped low brass instrument written into Wagner’s operas and some later scores, usually played by horn players.
Some uncommon instruments are not brass at all. The historical cornett, for example, has a similar name but is usually classed as a woodwind.
How brass instruments compare
This table summarizes the main brass instruments. Valve counts and bore details vary by model, so use it as a starting point.
| Instrument | Typical register | Pitch control | Bore | Common use |
|---|---|---|---|---|
| Trumpet | High | Three valves | Cylindrical | Orchestra, jazz, bands |
| Cornet | High | Three valves | Conical | Brass bands, solo |
| Flugelhorn | Mid-high | Three valves | Conical | Jazz, brass bands |
| Trombone | Mid | Slide | Cylindrical | Orchestra, jazz, bands |
| French horn | Mid | Rotary valves | Conical | Orchestra, wind bands |
| Euphonium | Mid-low (tenor) | Three or four valves | Conical | Concert and brass bands |
| Baritone horn | Mid-low | Usually three valves | Conical | School and marching bands |
| Tuba | Low | Three or more valves | Conical | Orchestra, bands |
| Sousaphone | Low | Three valves | Conical | Marching bands |
For more on bore shape, see conical vs cylindrical bore.
10 facts about brass instruments
- The lips make the sound. The buzz of the lips starts the vibration, and the tubing shapes it.
- Longer tubing means lower pitch. Valves and slides change the tubing length to change notes.
- Brass is not the only material. The alphorn is traditionally made of wood or natural horn, for example.
- The trombone is the best-known brass instrument without valves. It uses a slide instead.
- Trumpets and trombones are mostly cylindrical. Horns, cornets and euphoniums are mostly conical.
- Valves changed the family in the early 1800s. Before valves, many brass instruments could play only a limited set of notes.
- The tuba is one of the younger instruments. It dates to the 1830s.
- The saxophone is made of brass but is a woodwind. It uses a single reed.
- Piston valves and rotary valves feel different. Piston valves are common on trumpets; rotary valves are common on French horns.
- Brass instruments play in many settings. They appear in orchestras, concert and brass bands, jazz, pop and marching bands.
Most versatile brass instrument
Many players and teachers name the trumpet and the trombone as the most versatile brass instruments. The trumpet has a bright, carrying lead voice and a wide dynamic range, and it appears in orchestras, jazz, pop and marching bands. The trombone has a warm, wide range and a slide that allows smooth glides between notes, and it plays in orchestras, jazz and brass bands.
“Most versatile” is a judgment call, not a measurable title. The French horn is often praised for its blend and expressive range, and the euphonium and tuba have strong roles in bands. Each instrument also has its own challenges, covered in what are the hardest brass instruments to play.
Pick the instrument whose sound you like, then the versatility will come from practice and the styles you choose to play.