The short answer
Most trumpeters tune to concert A at 440 Hz. On a B♭ trumpet, concert A is written as B, so you play a written B and set your tuner to read A.
Why A440, and when ensembles use 442
A440 means the A above middle C vibrates 440 times per second (440 Hz). It is the most common reference pitch for tuning. Many orchestras tune slightly higher, often to 442 Hz, and some groups use other standards. If you play in an ensemble, follow the group’s reference, not the tuner’s default.
Warm up before you tune
Brass instruments usually play sharper when they are warm, because the air inside the tubing warms up and the pitch rises. Play for a few minutes first, then tune. Pitch can drift as you play, so check again at the start of rehearsal.
Set the main tuning slide
The main tuning slide is the usual adjustment. Pulling it out lowers the pitch, and pushing it in raises it. Many teachers advise against pulling the mouthpiece far out to change pitch, because that also changes tone and response.
- Play the written B at a steady, medium-soft dynamic, with a tuner or the ensemble’s reference.
- If the tuner reads sharp, pull the main tuning slide out a little. If it reads flat, push the slide in.
- Play again until the tuner reads A (440 Hz, or your group’s reference).
- Check the other notes of the scale, as the next section explains.
Check the other notes
One note is not enough. After tuning the main note, check a few others, such as the open notes (C and G) and the third-valve notes (such as D with 1-3). Some notes need a slide adjustment or a change in lip position. The third-valve notes are covered in the B♭ major guide, and the full set of notes is in the chromatic chart.
A tuner or the ensemble?
A clip-on tuner or a tuning app gives a clear reading for practice. In an ensemble, follow the director’s reference, which is often the A from the oboe or a tuning note the conductor gives. For the harmonic pattern that sits underneath every note you play, see the overtone series.