What a chromatic scale is
A chromatic scale uses every half step in an octave: C, C♯/D♭, D, and so on up to the next C. On trumpet, learning the chromatic scale means learning a fingering for every note, so it is the reference for every other scale. The chart below uses written pitch, the notes on the page. A B♭ trumpet sounds each written note a whole step lower. For the B♭ concert scale, see B♭ major on trumpet.
How valves change pitch
Each valve adds tubing, which lowers the pitch. Combined valves lower the pitch by the sum of their amounts:
| Valves pressed | Lowers the pitch by |
|---|---|
| None (open) | 0 half steps |
| 2 | 1 half step |
| 1 | 2 half steps (a whole step) |
| 3 | 3 half steps (a step and a half) |
| 1 and 2 | 3 half steps (same as valve 3) |
| 2 and 3 | 4 half steps |
| 1 and 3 | 5 half steps |
| 1, 2 and 3 | 6 half steps |
The valves set the series of notes available, and the player’s lips choose the harmonic within it. Every note in the chart comes from one valve setting and one harmonic.
Chromatic fingering chart (written pitch)
The chart runs from F♯3, a common lowest note, up to C6. The standard fingering is in the middle column, and alternates are in the right column.
| Note | Valves | Alternate |
|---|---|---|
| F♯3 | 1-2-3 | |
| G3 | 1-3 | |
| G♯3 / A♭3 | 2-3 | |
| A3 | 1-2 | 3 |
| A♯3 / B♭3 | 1 | |
| B3 | 2 | |
| C4 | 0 (open) | |
| C♯4 / D♭4 | 1-2-3 | |
| D4 | 1-3 | |
| D♯4 / E♭4 | 2-3 | |
| E4 | 1-2 | 3 |
| F4 | 1 | |
| F♯4 / G♭4 | 2 | 1-2-3 |
| G4 | 0 (open) | 1-3 |
| G♯4 / A♭4 | 2-3 | |
| A4 | 1-2 | 3 |
| A♯4 / B♭4 | 1 | |
| B4 | 2 | |
| C5 | 0 (open) | |
| C♯5 / D♭5 | 3 | 1-2-3 |
| D5 | 1 | 1-3 |
| D♯5 / E♭5 | 2 | 2-3 |
| E5 | 0 (open) | 3 |
| F5 | 1 | 1-3 |
| F♯5 / G♭5 | 2 | 2-3 |
| G5 | 0 (open) | 1-2 or 3 |
| G♯5 / A♭5 | 1 | 2-3 |
| A5 | 2 | 3 |
| A♯5 / B♭5 | 0 (open) | 1 |
| B5 | 2 | |
| C6 | 0 (open) |
These are the common fingerings. Check the upper notes against a tuner on your own instrument, since the higher notes depend on the harmonic you play.
Alternate fingerings
An alternate gives the same note with a different combination. Two cases are common:
- Valves 1 and 2 together lower the pitch by the same amount as valve 3, so both give the same note (for example, A and E).
- Higher notes often have several fingerings. Players choose by tone, tuning and how the note sits in a passage.
What “full range” covers
Players and teachers use different working ranges. Many use F♯3 (written) as the lowest standard note and C6 as a common upper target. Players go beyond both, with low pedal tones and higher notes. Notes above C6 follow the same valve arithmetic, but their fingerings depend on the harmonic you play, so they are best learned with a teacher.
Practicing the chromatic scale
Chromatic practice trains the fingers to move between valve combinations quickly and accurately. A simple routine:
- Play the scale slowly, holding each note briefly.
- Slur the notes with steady air, with no tonguing.
- Add a tongued version, then a dotted rhythm.
- Play it up and down, starting from the lowest note you can control.
Slow chromatic practice is a common way to learn the cross-fingerings in the lower register. For exercises that build on scales, see trumpet scale exercises. For the harmonics that sit underneath each valve setting, see the overtone series.