Tuba and Euphonium

What is the fourth valve on an euphonium?

The euphonium's fourth valve lowers the pitch by a perfect fourth and steadies the low register. Here is how it works and how compensating systems differ.

On this page
  1. Short answer
  2. What the fourth valve does
  3. Non-compensating and compensating systems
  4. Using the fourth valve
  5. Four-valve and three-valve euphoniums
  6. Where to go next

Short answer

The fourth valve on a euphonium adds a fixed length of tubing when it is pressed. That lowers the pitch by a perfect fourth, which is 5 semitones. It gives the player an extra low register and an alternative fingering for some notes that are otherwise hard to keep in tune. On most instruments it is worked by the left hand.

What the fourth valve does

Valves 1, 2 and 3 lower the pitch by 2, 1 and 3 semitones. The fourth valve lowers it by 5 semitones, which is the same as pressing 1 and 3 together. That is why the fourth valve can replace 1-3 for the same note.

It can also replace 2-4 for 1-2-3, since both lower the pitch by 6 semitones in total. Some players find the fourth-valve versions sit better in tune on some notes, though the result depends on the instrument.

Non-compensating and compensating systems

Four-valve euphoniums come in two designs.

Non-compensating. The fourth valve works like any other valve, adding one fixed length of tubing. Its tubing is not quite long enough for the lowest notes, so those notes can sit sharp, and the player needs to adjust the embouchure to bring them in tune.

Compensating. The fourth valve redirects air through extra tubing that is added to valves 1, 2 and 3 when they are used together with it. This compensates for the extra tubing that each depressed valve needs in the low register. The result is better intonation in the low register, especially when several valves are pressed.

Some four-valve euphoniums are compensating and some are not, so try one before you buy.

Using the fourth valve

  • Alternate fingerings. Use 4 in place of 1-3, and 2-4 in place of 1-2-3. Each pair lowers the pitch by the same amount, so you can choose whichever sits better in tune.
  • Low notes. The fourth valve extends the low register, which is what allows many four-valve players to reach notes below the range of a three-valve instrument.
  • Practice. Play long tones on the low notes, and check each alternate fingering with a tuner. The lips still do much of the work.

For the full fingering list, see the 4-valve euphonium and baritone finger chart.

Four-valve and three-valve euphoniums

Three-valve euphoniums are common and perfectly good for many players. Four-valve instruments are often chosen by advancing players and professionals for the wider low range and the intonation alternatives. The extra valve adds weight, cost and complexity, so the choice depends on the music you play and your teacher’s advice.

Where to go next

If you are comparing the euphonium with the baritone, euphonium vs baritone vs tuba explains how their bore and valves differ. For how the fourth valve fits into the instrument’s overall difficulty, see is the euphonium hard to learn?. The tuba has the same kind of choice, covered in three-valve vs four-valve tubas.

The complete guide to tuba and euphonium

About the Tuba: Sound, Sizes and What It's Like to Play
Read the guide

Keep exploring

Guides from other topics

All topics →